Paints
Please use the selection guide below to help you select the best paint system for your application.
|
Description/Application
|
Primer/Surface Preperation
|
Top Coat
|
|---|---|---|
|
METAL - GENERAL PURPOSE FINISH
|
||
|
A good range of general purpose metal paint systems, suitable for all types of metal work.
|
||
|
BRUSH/ROLLER APPLICATION
|
310-006 QD High Build Anti-Corrosive Primer + 311-106 QD Undercoat
|
308-200 QD Gloss High Build Brushing Finish
|
|
CONVENTIONAL SPRAY APPLICATION
|
200-026 QD High Build Anti-Corrosive Primer
|
202-000 QD Full Gloss Finish
|
|
AIRLESS SPRAY & AIR ASSISTED AIRLESS SPRAY APPLICATION
|
200-026 QD High Build Anti-Corrosive Primer
|
203-142 QD High Build One Coat Finish
|
|
METAL - SUPERIOR FINISH
|
||
|
BRUSH/ROLLER APPLICATION
|
310-006 QD High Build Anti-Corrosive Primer
|
302-000 Single Pack Polyurethane Finish
|
|
CONVENTIONAL SPRAY APPLICATION
|
100-006 2 Pack Epoxy Zinc Phosphate Primer
|
100-100 2 Pack Epoxy Finish
|
|
AIRLESS SPRAY & AIR ASSISTED AIRLESS SPRAY APPLICATION
|
100-406 2 Pack Epoxy High Build Zinc Phosphate Primer
|
100-100 2 Pack Epoxy Finish
|
|
METAL - XYLENE-FREE SYSTEMS
|
||
|
Environmentally friendly solvent free system, suitable for all application methods.
|
340-005 Xylene Free Primer/Finish
|
/
|
|
METAL - ONE COAT SYSTEMS
|
||
|
One coat system suitable for use on blast cleaned steel. Conforms to Department of Environment PG6/23 clause 20 (d) (v) for VOC emissions below 420g/L. Suitable for all spray applications, but only small areas can be brushed.
|
207-401 QD Anti-corrosive One Coat Finish
|
/
|
|
METAL - WATER BASED SYSTEMS
|
||
|
Environmentally friendly water based solvent free system, suitable for all application methods except air assisted spray. Due to the product being quick drying, only small areas should be brushed.
|
600-056 QD High Build Anti-Corrosive Water Based Primer
|
600-060 QD Gloss Water Based Finish
|
|
METAL - GATES & RAILINGS, NEW GALVANISED STEEL
|
||
|
ALL APPLICATION METHODS
|
Degrease with 028-000 Mordant T-Wash
|
450-004 Vinyl Sheen Primer/Finish
|
|
METAL - GATES & RAILINGS RE-PAINTING
|
||
|
ALL APPLICATION METHODS
|
Clean any rust or flaking paint from surface of metal
|
450-004 Vinyl Sheen Primer/Finish
|
|
COMMERCIAL VEHICLES
|
||
|
All our commercial vehicle paint is fully compliant with EU Directive 2004/42/11B covering VOC emissions.
|
||
|
BRUSH/ROLLER APPLICATION
|
310-006 QD High Build Anti-Corrosive Primer
|
300-330 QD Polyurethane High Opacity Brushing Finish
|
|
CONVENTIONAL SPRAY APPLICATION
|
203-406 QD Anti-corrosive Transport Primer
|
CP07 360-000 2 Pack Polyurethane Transport Finish
|
|
AIRLESS SPRAY & AIR ASSISTED AIRLESS SPRAY APPLICATION
|
203-425 QD Super Build Trailer Prime
|
CP07 360-000 2 Pack Polyurethane Transport Finish
|
|
AGRICULTURAL VEHICLES
|
||
|
BRUSH/ROLLER APPLICATION
|
310-006 QD High Build Anti-Corrosive Primer
|
308-200 Agrisheen High Build Finish
|
|
CONVENTIONAL SPRAY, AIRLESS SPRAY & AIR ASSISTED AIRLESS SPRAY APPLICATION
|
203-425 QD Super Build Trailer Prime
|
300-300 QD Polyurethane Spray finish
|
|
BUILDINGS - METAL CLADDING, GALVANISED STEEL, PLASTISOL SHEETING
|
||
|
For best results, test a small area to see if the paint dries OK, or remains tacky. If the paint remains tacky, then the surface should be primed first, then over-coated.
|
||
|
ALL APPLICATION METHODS
|
200-026 QD High Build Anti-Corrosive Primer (If required)
|
450-004 Vinyl Sheen Primer/Finish
|
|
CONCRETE FLOORS & WALLS
|
||
|
PAR concrete floor & wall paints are designed to be applied via roller or brush. PAR Aggregate can be mixed into any of our floor paints to provide a non-slip surface, or we can supply pre-mixed.
|
||
|
LIGHT TRAFFIC
|
/ |
300-600 1 Pack Polyurethane Floorcoat
|
|
HEAVY TRAFFIC + LIGHT CHEMICAL RESISTANCE
|
/
|
101-100 2 Pack Epoxy Floorcoat
|
|
HEAVY TRAFFIC + HEAVY CHEMICAL RESISTANCE
|
/
|
350-100 2 Pack Polyurethane Floorcoat
|
|
TARMAC & CONCRETE LINE MARKING
|
||
|
PAR line marking paints are designed to be applied via spray, and are suitable for indoor or outdoor use. Due to it's quick drying properties, only small areas should be brushed. Drive Revive is suitable for use on tarmac, concrete and paving. It can be used on new areas for added weather protection or old, faded areas to make them look like new. Drive Revive is best applied via roller or brush.
|
||
|
LINE MARKING - STANDARD PERFORMANCE
|
/
|
400-409 Chlorinated Rubber Road Line Finish
|
|
LINE MARKING - HIGH PERFORMANCE
|
/
|
160-006 1 Pack Epoxy Road Line Finish
|
|
LINE MARKING - ULTIMATE PERFORMANCE
|
/
|
101-302 2 Pack Epoxy Road Line Finish
|
|
LINE MARKING - SEALING OVER PAINTED LINES
|
/
|
350-100 2 Pack Clear Polyurethane
|
|
DRIVE REVIVE - COSMETIC FINISH
|
/
|
600-230 Drive Revive Water Based Finish
|
|
HEAT RESISTANT
|
||
|
Suitable for exterior and interior use and any metal surface requiring high heat resistance, such as pipes, heat extractors, barbecues etc.
|
||
|
May be applied via brush/roller, conventional spray or air-less spray.
|
/ |
510-000 Heat Resistant Finish (Up to 600°C) |
| / |
204-500 Heat Resistant Finish (Up to 250°C) |
|
|
ANTI-CLIMB PAINT
|
||
| Anti-Climb paint does not dry and will stick to clothes and skin, providing a good deterrent to anyone intending to walk or climb in restricted access areas. Anti-climb paint can only be removed with solvents & cleansing creams. | ||
| BRUSH/SPATULA APPLICATION | / | 313-300 Anti-Climb Paint |
