VENTILATION FANS
CS SERIES VENTILATION FANS
12 blade yellow Plastic fans with push in red bushes, 71 - 180 frame sizes
CV SERIES VENTILATION FANS
6 blade black Plastic fans with screw clamp fixing, temperature resistant up to 180°C, 63 - 160 frame sizes
MV SERIES VENTILATION FANS
12/16 blade Polypropylene Plastic fans with keyway entry, 56 - 200 frame sizes
MEC SERIES VENTILATION FANS
12/17 blade Aluminium fans with keyway entry, 80 - 355 frame sizes
EZE-FANS® & EZE-HUBS®
12 blade Plastic or Aluminium fans with either a dish or flat back & a screw-in hub, 71 - 250 frame sizesFAN COWLS
FC SERIES FAN COWLS
Primed deep drawn Steel with fixing holes, 56 - 355 frame sizes
ED SERIES FAN COWLS
Primed deep drawn Steel with fixing holes, extra-deep for brake motors, 56 - 280 frame sizes
PPN SERIES FAN COWLS
Black Plastic, 56 - 90 frame sizesTERMINAL BLOCKS
TER-MOTOR KM SERIES 
6 stud rectangular blocks, glass reinforced polyester base material, flame retardant (UL94 V-O), M4 - M10 thread size range
TB SERIES
6 stud rectangular blocks, glass reinforced melamine base material, M3 - M20 thread size rangeTHERMAL CUT-OUTS
T11 SERIES
Temperature & current sensitive, normally closed contacts, 2.5 amps @ 250 volts AC, available 70 - 180°C
T10 SERIES
Temperature & current sensitive, normally open contacts, 2.5 amps @ 250 volts AC, available 50 - 190°C
T20 SERIES
Temperature & current sensitive, normally closed contacts, 10 amps @ 250 volts AC, available 50 - 160°C
T21 SERIES
Temperature & current sensitive, normally open contacts, 16 amps @ 250 volts AC, available 50 - 160°CTHERMISTORS
PTC SERIES
Overload protection for motors & transformers, available in Singles & Triples from 80 - 180°CCAPACITORS
MOTOR START CAPACITORS
Aluminium Electrolytic AC Motor Starting Capacitors in plastic case, available with faston tags or flying leads
MOTOR RUN CAPACITORS
Metallized Polypropylene film Motor Run Capacitors in plastic case, available with faston tags or flying leadsANTI-CONDENSATION HEATER TAPES
RSV SERIES
Specially designed to prevent the formation of condensation in electric motors when they are turned off. Ex approved for use in flameproof motorsTERMINALS & LUGS
COPPER TUBE TERMINALS & SPLICES
1.50mm2 - 1000mm2 conductor sizes available. Manufactured from precision drawn tubes to BS 2871 and designed to meet the performance requirements of BS 4579 Part 1. Supplied bright electro tin plated to BS 1872 Part 2 for corrosion resistance
INSULATED TERMINALS 
0.50mm2 - 6mm2 (Red, Blue & Yellow) conductor sizes available. Manufactured to meet the requirements of BS 6516 Part 2 : 1990 from high conductivity copper or brass, electro tinned for corrosion resistance. Available in rings, forks, flanged forks, locking forks, hooks, blades, pins, splices, parallel splices, end splices, push-on female, push-on male, totally insulated push-on, piggy back, totally insulated piggy back, bullets, sockets, fully insulated female, fully insulated male. Generally supplied with a vinyl grip, but copper grips & uninsulated varieties also available
CRIMPING TOOLS
A full range of crimping tools are available for our range of Copper Tubes & Insulated TerminalsCABLE TIES
Steel, Velcro® & other special cable ties available, along with tensioning tools. Please contact our sales department with your requirements
STANDARD NYLON 6.6
Manufactured in accordance with Military Specification MIL-S 23190E, flame retardant to UL94 V-2, - 40 to + 80°C. Available in a variety of colours
TWIST TIES
'U' shaped releasable ties manufactured from Nylon 6.6, flame retardant to UL94 V-2, -40 to +80CCABLE MARKERS
FLEXIBLE PVC MARKERS
To fit cable sizes from 0.75mm2 - 25mm2, resistant to salt water, detergents, fuels, oils & solvents, -40 to + 90°C. Straight cut & chevron cut available in markings 0 - 9, A - Z, PLUS, MINUS, OBLIQUE, EARTH, BLANK
PVC OVAL MARKERS
For larger cables. Markers are fitted to a carrier strip & then attached to the cable -40 to + 90°C. Carrier strips for 8, 12 & 24 markers available
CLIP-ON MARKERS
Clip-On markers cover 95% of the cable, ensuring a tight grip. To fit cable sizes from 0.75mm2 - 6mm2, -40 to + 90°C. Markers supplied on handy applicator wands which are colour coded according to size
All the above cable markers are available in the following characters: 0 - 9, A - Z, PLUS ( + ), MINUS ( - ), OBLIQUE( / ), EARTH, BLANK
